濟南德成鋁業有限公司是一家生產銷售鋁卷的高科技企業，今天就給大家說說鋁卷加工經常用的刀具有哪些？
　　Jinan Decheng Aluminum Co., Ltd. is a high-tech enterprise specializing in the production and sale of aluminium coils. Today, I would like to tell you about the cutting tools commonly used in the processing of aluminium coils.
　　人士說：“鋁卷加工倡議運用下列三類刀具之一”:
　　Professionals said: "Aluminum coil processing initiative uses one of the following three types of tools":
　　，用金剛石刀具；
　　First, use diamond tools.
　　第二，鋁卷氧化設備不鍍層的超細顆粒硬質合金刀具；
　　Secondly, the ultra-fine cemented carbide cutting tools which are not coated in the aluminium coil oxidation equipment;

　　第三，帶未含鋁鍍層(PVD)辦法的硬質合金刀具,如鍍TiN、TiC等；刀具的容屑空間要大,普通倡議用2齒,前角、后角要大(如12°-14°,包括端齒后角)。假如只是普通銑面,能夠用45°主偏角的可轉位面銑刀,配用特地加工鋁合金的刀片,應該效果更好。鋁卷流水線在1808年在實驗室應用電解還成為鋁材,于1884年即被作為建筑資料運用在美國華盛頓留念碑尖頂上至今;鋁材參加各種金屬元素合成的鋁合金資料已被建筑工業普遍應用在各環節上。鋁合金常用板材厚度:高級金屬屋面(和幕墻)系統的普通為0.8-1.2mm(而傳統的普通要≥2.5mm)。
　　Thirdly, cemented carbide cutters with non-aluminium plating (PVD) method, such as TiN, TiC plating, etc., should have large chip capacity space, 2 teeth are recommended in general, and large front and rear angles (such as 12-14 degrees, including back angles of end teeth). If only ordinary milling face can be used with 45 degree principal deviation angle indexable surface milling cutter and special processing of aluminum alloy blade, the effect should be better. The aluminium coil assembly line was also used as aluminium material in the laboratory in 1808, and it was used as building material at the top of Washington Memorial Monument in 1884. The aluminium alloy material which participates in the synthesis of various metal elements has been widely used in various links of the construction industry. Aluminum alloy commonly used sheet thickness: high-grade metal roofing (and curtain wall) system is generally 0.8-1.2 mm (while the traditional system is more than 2.5 mm).
　　以上是對“鋁卷加工用的刀具有哪些你知道嗎?”相關介紹，想要了解更多內容，歡迎訪問鋁卷生產廠家網站：http://m.ztjywl.comFor more information, please visit the website of aluminium coil manufacturer: http://m.ztjywl.com.